电子车辆识别技术的性能、安全性和成本分析及应用

电子车辆识别(EVI)是利用电子信号对车辆进行自动识别和监测的技术.随着RFID技术的不断发展,EVI应用的领域和范围不断扩大,这对EVI的性能、安全性和成本提出了更高的要求.     

A Delphi analysis on green performance evaluation indices for ports in China

This study identified a set of applicable and practical green performance evaluation indices for Chinese ports using the Delphi technique. The research was conducted by targeting three representative Chinese ports in Eastern China: the Shanghai Port, Ningbo Port, and Qingdao Port. An effective expert panel was structured with direct stakeholders related to green performance, which was based on a sufficient consideration of the unique and the special decision-making system for Chinese ports. Twenty-one green performance indices in six dimensions (i.e. liquid pollution management, air pollution management, noise control, low carbon regulations and energy savings, marine biology preservation, and organization and management) were eventually identified through three rounds of iterations. The identified green performance indices for Chinese ports are highly consistent with the Chinese Government’s environmental policies. Compared with European ports, the green port performance indicators in China are not as comprehensive. The indicators that are strictly consistent with national macro policies and the factors that are more easily seen, heard, and felt were perceived to be more important. From an academic perspective, this study offers a new approach for system establishment and green practice criteria exploration and thus provides a significant basis for further green port studies.     

基于高雷诺数的并联双圆柱绕流研究

文章采用基于边界瞬时涡量守候的拉格朗日方法(IVCBC),结合并列双圆柱的特点,建立了双圆柱绕流数值计算模型。对高雷诺数下Re=6×10~4,间隙率为T/D=1.1~7的并联圆柱双圆柱二维绕流特性进行了研究。提出了双圆柱间隙中点的速度区别宽窄尾流的新方法。分别讨论了流体力系数随间距增加的特点,脉动流体力的特点,尾流特征以及斯托哈尔数特征。研究发现:区别宽窄尾流的新方法是可靠的;在双圆柱尾流附近有五种尾流模型存在;同时发现了在宽窄尾流的频率,存在一个中间频率。     

基于气液两相流解析模型的水冲压发动机推进特性分析

给出了喷管中气液两相流动等温正压模型的解析解。基于该解析模型以及水冲压发动机内流道几何参数,迭代求解了发动机在一系列工况下的推进特性。研究表明,水冲压发动机的推力、效率、比冲随着气相质量流量以及航速的共同提高而提高,单单增加航速或单单增加气体质量流率,都会使得比冲和效率先增后减。单单增加气体质量流率,水流流量减小,推力增加,但是耗气量显著增加。单单增加航速,水的流量增加,推力将先增后减。     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

Effectiveness of travel time reliability indicators in the light of the assessment of dynamic managed lane strategy

ABSTRACT

The aim of traffic management is to ensure a high quality of service for a maximum number of users by decreasing congestion and increasing safety. Uncertainty of travel times decreases the quality of service and leads end users to modify their plans regardless of the average travel time. Indicators describing travel time reliability are being developed and should be used in the future both for the optimization and for the assessment of active traffic management operations. This article discusses the efficiency of certain reliability indicators in an ex-post assessment of a traffic management strategy. Ex-post assessment is based on an observational before–after study. As some factors other than the studied management strategy may intervene between the two periods, and as most reliability indicators require knowledge of the full travel time distribution and not only its average, a methodology is developed for the identification of the impact of these exogenous factors on the whole distribution. Many reliability indicators are split into different parts allowing the identification of the part due to the management strategy impact. The methodology is tested numerically on a managed lane operation consisting of Hard Shoulder Running (HSR) at rush hour on a section of a French motorway. The variation of some reliability indicators appears misleading, whereas the splitting of the indicators increases our understanding of the strategy and highlights its impact. The paper gives the reliability assessment of the HSR field test and discusses different reliability indicators to identify their potential performances and shortcomings.     

水泥粉煤灰碎石基层材料路用性能的研究

对水泥粉煤灰碎石基层材料的各项路用性能进行了试验研究.研究表明,水泥粉煤灰稳定碎石兼具水泥和二灰稳定材料的优点,将其作为路面基层材料是可行的.     

二灰冷再生沥青路面基层路用性能研究

通过对原路材料进行材料组成分析,并且通过对几种不同配合比的冷再生材料的无侧限抗压强度、劈裂强度、冲刷性能的初步研究,对二灰冷再生材料的性能做出了初步评价.二灰冷再生材料基本可以满足规范对沥青路面的半刚性基层的要求.     

橡胶沥青技术在阿喀高速公路中的应用

橡胶沥青是一种新型的筑路材料,具有良好的高、低温性能,且有利于环保。对橡胶沥青AR-AC-16C混合料在原材料选择、配合比设计、路用性能检测等方面进行分析,并对橡胶沥青在阿喀高速公路中的应用情况进行介绍,为新疆地区橡胶沥青的施工提供参考。     

单交叉口公交信号优先控制策略建模研究

为研究公交信号优先策略对交叉口公交车及社会车辆的影响,建立公交信号优先控制模型及延误模型,以采取公交优先方式后交叉口所有车辆的人总延误减小为控制目标,引入效益指数PI,以信号交叉口优先相位获得的效益与非优先相位损失效益的差值来衡量整体效益,使得每一次采取的公交优先策略都能提高信号交叉口的整体效益。结果表明:在信号交叉口采取信号优先控制策略后,交叉口车辆的人总延误显著降低。本研究成果对其他信号优先控制方式模型、交叉口群公交优先协调控制等具有一定的参考价值和理论意义。